Kriteriji i metodologija za ocjenu konstrukcije i potvrdu otpornosti elemenata ovjesa automobila
Downloads
CRITERIA AND METHODOLOGY FOR DESIGN EVALUATION AND DURABILITY APPROVAL OF CAR SUSPENSION COMPONENTS
In this paper the criteria and requirements for the approval of the service strength and durability of vital car suspension components are treated. The overview of the main influences on the fatigue life is given and the methodology for design evaluation and reliable time and cost savings development, including durability approval, are described.
On two examples – a wheel and a suspension arm – the procedure including individual steps is explained.
Downloads
V. GRUBIŠIĆ: Criteria and Methodology for Light-Weight Design of Vehicle Components Subjected to Random Loads. SAE Paper 850367 (1985), SAE SP 611 (1985).
V. GRUBIŠIĆ, G. FISCHER: Automotive Wheels, Method and Procedure for Optimal Design and Testing. SAE Paper 830135 (1983), SAE Trans. 92.
V. GRUBIŠIĆ: Determination of the Load Spectra for Design and Testing. Journal of Vehicle Design 15 (1994), No. 1/2, pp. 8–26.
Biaxial Wheel/Hub Test Facility. Proceedings of the 1st Int. User Meeting, Sept. 30, 1993, Darmstadt, Ed. by V. Grubišić and G. Fischer, Fraunhofer-Institut für Betriebsfestigkeit (LBF), Darmstadt, TB-204 (1994).
A. MÜLLER, V. GRUBIŠIĆ, G. FISCHER: Fatigue Evaluation of Passenger Vehicle Suspension Components using a Generalized Multiaxial Load Programme. In: Proceedings of the 4th Int. Conf., Firenze, March 16–18, 1994, Ed. by ATA, Orbassano and DMTI, Firenze, Vol. 2 (1994), pp. 879–898.
A. RUPP, V. GRUBIŠIĆ, J. NEUGEBAUER: Development of a Multi-Component Wheel Force Transducer – A Tool to Support Vehicle Design and Validation. SAE Paper 930258 (1993).
V. GRUBIŠIĆ: Criteria and Methodology for Lightweight Design of Vehicle Components. Fraunhofer-Institut für Betriebsfestigkeit (LBF), Darmstadt, TB-176 (1986).
J. PETERSEN, B. WEISSGERBER: The Conception, Description and Application of a New Vehicle Endurance Test System at AUDI NSU. SAE Paper 820094 (1982).
K. FEITZELMAYER, U. BRETTING: Development of Commercial Vehicle Driven Axles on Multi-Axis Test-Set-Ups. Paper of the Conference “Prediction and Simulation of In-Service Conditions”, London, 22/23 May 1995, I. Mech. E. (1989), C 113/85, pp. 131–138.
K.-P. WEIBEL: Mehr als 10 Jahre Betriebsfestigkeitsprüfung mit den mehrachsigeninteraktionsständen der BMW AG. In: ATZ (89) 1987, No. 4, pp. 193–198.
H. KOETZLE, W. WEIBLEN, G. JACOBY: Active Restraining System for Axle and Complete Car Test Rigs. SAE Paper 930255 (1993).
K. LABES, B.-O. MIEHE, F.-J. STOLZE, G. JACOBY: Fatigue Testing of Complete Vehicles in the Laboratory During the Development Phase. In: ATZ (97), 1995, No. 5, pp. 270–278.
V. BIGLIANI, G. DEMICHELIS, G. JACOBY: A Rig for Vehicle Suspension Durability Test. In: Proceedings of the 4th Int. Conf., Firenze, March 16–18, 1994, Ed. by ATA, Orbassano and DMTI, Firenze, Vol. 2 (1994), pp. 857–877.
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
