Composite Materials in the Construction of Transport Means
Downloads
Downloads
K. Milos, Dissertation: AlP3 Particle reinforced Al materials
produced by Powder Metallurgy, Technical University
Vienna, Vienna 1994.
Stuart. M. Lee: Handbook of Composite Reinforcements,
VCH Publishers. Inc. New York, 1993.
K. Schulte und K. U. Kainer: Verbundwerkstoffe und
Werkstoffverbunde, WILEY-VCH Verlag GmbH,
Weinheim 1999.
P. K. Mallick and S. Newman: Composite Materials
Technology-Processes and Properties, Carl Hanser V erJag,
Munchen, 1990.
J, Banhart: Manufacturing Routes for Metallic Foams,
JOM 52(12) 2000, pp. 22-27
J, Banhart, J, Baumeister and M. Weber: Herstellung
undAnwendungsmoglicheiten van Bauteilen Geschaumten
Metallen, Werkstoffen in Automobilbau 97/98, Sonderausgabe,
A TZ/MTZ
S. Rawal: Metal Matrix Composites for Space Application,
JOM 53(4)2001, pp. 14-17
Peter J. Alvarado: Steel vs. Plastics: The Competition for
Light Vehicle Fuel Tanks, JOM 48(7) 1996, pp. 22-25
P. Rohatgi: Metal-Matrix Composites, Advances in Materials
Technology-MONITOR, 17, 1990.
F. Richter: Die Physikalischen Eigenschaften van metalischen
Werkstoffen, Metall-45. Jahrgang, Heft 6, 1991.
R J, Morgan, F. M. Kong and J, K. Lepper: Laser
Induced Damage Mechanisms of Kevlar49 Composites,
J. Compos. Mater. 22,1027,1998.
W. L. Harper and C. E. McAJister: The Effect of Radiation
Kevlar49, US Department of Energy Report
Y-DA-6527,1975.
Du Pont Technical Report C-29: The Effect of mtraviolet
Light on Products Based on Fibres Kevlar29 and
Kevlar49, 1997.
W. F. Powers: Advanced Materials and Processes, May
F. 0. Andregg: lnd. Eng. Chem., 31,290,1935.
F. Stodolsky, A. Vyas, R Cuenea and L. Gaines: Life-
Cycle Energy Savings Potential from Aluminium Intensive
Vehicles; Conference Paper, oct. 16-19, 1995. Vienna
Dr. Branko Sarh: 'Lightweighting' of Composite Structure
for Transportation Systems: Lightweighting at Boeing,
Workshop at EADS, Munich, Germany, March 14,